EGS Home The Survey Data Products Database Overview Map Image Map Cart W.M.Keck Observatory

Hide DEEP2 downloadable files

The DEEP2 EGS data includes high-resolution DEIMOS spectra for more than 10,000 sources spanning 75 DEIMOS slitmasks. Each slitmask was observed for ~1 hour with some variation depending on seeing, weather conditions, etc. All observations utilize the 1200 lines/mm grating centered at 7800E and the OG550 order-blocking filter with 1\" slitwidths. The raw DEIMOS data were reduced using the DEEP2 DEIMOS spec2d pipeline (version v1.0.4). The 1-d and 2-d spectra for the entire dataset are available in the following tarballs.

Catalogs
d2z_acphot_.fits.gz (1.8 MB)
DEEP2 catalog with ACS matches (binary FITS file)
Add to cart
d2z_acphot_.fits.gz (1.6 MB)
DEEP2 catalog with ACS matches (ascii file)
Add to cart
Masks 1100 - 1156
spec1d.egs11.tar.gz (1676.6 MB)
1D spectra for masks 1100 to 1156
Add to cart
spec2d.egs11.00_04.tar (1941.2 MB)
2D spectra for masks 1100 to 1104
Add to cart
spec2d.egs11.05_09.tar (1571.8 MB)
2D spectra for masks 1105 to 1109
Add to cart
spec2d.egs11.10_15.tar (1943.4 MB)
2D spectra for masks 1110 to 1115
Add to cart
spec2d.egs11.40_44.tar (1559.7 MB)
2D spectra for masks 1140 to 1144
Add to cart
spec2d.egs11.45_51.tar (1879.9 MB)
2D spectra for masks 1145 to 1151
Add to cart
spec2d.egs11.52_56.tar (1878.9 MB)
2D spectra for masks 1152 to 1156
Add to cart
Masks 1200 - 1256
spec1d.egs12.tar.gz (1416.5 MB)
1D spectra for masks 1200 to 1256
Add to cart
spec2d.egs12.00_04.tar (1545.6 MB)
2D spectra for masks 1200 to 1204
Add to cart
spec2d.egs12.05_09.tar (1525.4 MB)
2D spectra for masks 1205 to 1209
Add to cart
spec2d.egs12.10_15.tar (1879.0 MB)
2D spectra for masks 1210 to 1215
Add to cart
spec2d.egs12.40_44.tar (1499.4 MB)
2D spectra for masks 1240 to 1244
Add to cart
Masks 1300 - 1356
spec1d.egs13.tar.gz (1622.2 MB)
1D spectra for masks 1300 to 1356
Add to cart
spec2d.egs13.00_04.tar (1560.0 MB)
2D spectra for masks 1300 to 1304
Add to cart
spec2d.egs13.05_09.tar (1589.5 MB)
2D spectra for masks 1305 to 1309
Add to cart
spec2d.egs13.10_15.tar (1891.7 MB)
2D spectra for masks 1310 to 1315
Add to cart
spec2d.egs13.40_44.tar (1537.0 MB)
2D spectra for masks 1340 to 1344
Add to cart
Masks 1400 - 1442
spec1d.egs14.tar.gz (183.0 MB)
1D spectra for masks 1400 to 1442
Add to cart
spec2d.egs14.tar (1236.2 MB)
2D spectra for masks 14**
Add to cart

This plot shows the right ascension and declination for each DEEP2 target (black) and those with positive ACS identifications (yellow).


The redshifts were measured using emission lines (Balmer Series, [NII], [SII], [OIII], [OII]) and the Calcium (H, K and other ) absorption features. Each redshift measurement was assigned a “quality” identifier according to at least two independent measurements . In the center the quality distribution is shown.


Quality codes were assigned on the basis of a set of criteria: a value of 4 is assigned to a “rock-solid” z measurement obtained from a spectrum with at least two clear features. A value of 3 indicates a good z value, with a 90% probability to be correct. At least two features are still required but ID is more doubtful than Q=4. A value of 2 indicates a non-usable measurement for the present catalog but the spectrum will be later revisited because a useful z value might be extracted from it. Q=1 means that the redshift is not usable and the data will never yield one. Q=-1 is reserved for stars.


This plot shows the z-magnitude diagram: magnitudes were obtained from Sextractor



Last modified: Wed Nov 29, 2006